Information:
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another;
The declared vibration total value may also be used in a preliminary assessment of
exposure.
Warning:
that the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used; and
of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time).
Wear hearing protection.
IMPORTANT
This tool is provided without battery and battery charger. Please buy a battery pack
(battery + charger) from the same trademark of this screwdriver. The recommended
product is: FEIDER 20V LITHIUM ION BATTERY CHARGER. Do not use non
recommended battery.
Bits are not provided with this tool. You can buy 1/4 hexagonal bits to use with this tool.
For more information, ask advice to your retailer.
3. OPERATION
a. Charging
FEIDER range battery and charger are not sold together with this cordless drill.
You must buy separately these elements.
Battery has not been fully charged at the factory. Follow the instructions for
charging before use.
Before using it for the first time, charge the battery for 60min to 130min. Insert the charger
plug into the charging socket and plug the charger into a 230V/50Hz electrical outlet
(check the electrical specifications of battery and the charger before use and read
carefully the instruction manual for battery and charger).
Charge status
To display the amount of charge left on the battery, press the charge level indicator.
