k. Working clamping
To prevent the drill from spinning the workpiece if the drill bit becomes jammed in the hole
being drilled, it is recommended that a drill vice or other suitable clamp is used to secure the
workpiece during the drilling operation.
If the bit jams in the workpiece or if the drill stalls, stop the tool immediately. Remove the bit
from the workpiece and determine the reason for jamming.
Note: this drill has an electric brake. When the switch trigger is released, the chuck stops
turning. When the brake is functioning properly, sparks will be visible through the vents
slots on the housing. This is normal and is the action of the brake.
4. MAINTENANCE AND STORAGE
a. Maintenance
-
Clean the housing only with a damp cloth. Do not use solvents! Then wipe thoroughly.
-
Check the condition of the tool. If the tool is damaged or has malfunction, do not use it
and bring it to a qualified service for inspection or reparation.
-
To maintain the optimum battery power, we recommend that the battery be
discharged and recharged every two months.
b. Storage
Remove the battery from the tool.
Store the tool in a dry place and protected from freezing, the ambient temperature should
not exceed 50◦c. Put it out of the reach of children.
5. DISPOSAL
Electric power tools, as well as their accessories and packaging, must each be able
to follow an appropriate recycling pathway. Only for the countries of the European
Union:
Do not throw away your electrical appliance with the household waste! In
accordance with the European Directive 2012/19/EU on waste electrical and
electronic equipment and its implementation in national laws, power tools that can no longer
be used must be separated and follow an appropriate recycling pathway.
