ASSEMBLY
14
Connecting Garden Hose to Pressure Washer
•
•
Inspect inlet screen and remove any debris.
•
Connect hose to water inlet and tighten by hand.
•
Turn on water.
•
Purge the system’s pump of air by releasing the safety and squeezing the trigger of the spray gun.
The minimum recommended length for the water supply pipe is 10 meters (but not more than 25 meters) with a diameter of 12.5 mm to avoid back
pressure and any potential damage to your appliance. Make sure it can withstand water and a maximum pressure of 10bar (0.1Mpa). If you want
to connect your device to other water sources, make sure the maximum water inlet pressure is 10bar (0.1Mpa).
Connect High Pressure Hose to Pump
•
Attach end of high pressure hose to the high pressure outlet on pump.
Summary of Contents for FNHPT240
Page 22: ...22 WIRING DIAGRAM...