OPERATION
17
• For stripping, spot cleaning, blasting, and hard to reach areas use the 25° spray tip. This option is for removing
paint, rust, mildew, or grease stains. This option can be used for the removal of paint, rust, oil stains, tar, gum,
and other stubborn substances. Use extreme caution when using this nozzle.
• For applying pressure washer safe detergent, use the black soap nozzle.
• The angle of the nozzles shown indicates the spray “fan shape” projected from the nozzle when the trigger of the
spray gun is pulled and high pressure water is passing through the nozzle. The pressure and flow will not change
significantly due to the various fan patterns (Nozzles).
SPRAY
WAND
NOZZLE
“CLICK”
0°
15°
25°
40°
Soap
Applying Detergent
• Rinse surface with cool water before applying cleaner.
• Prepare detergent as required by job. For best results follow detergent directions as supplied from manufacturer.
• Remove cap from detergent container and fill.
• Spray detergent on surface. For best results use long, even, and overlapping strokes. Allow detergent to set for
about 3 minutes before rinsing, but do not allow detergent to dry on surface or it may cause streaking or cause
damage to the surface.
•
a bucket of clean water to remove detergent.
WARNING
!
Only use mild, environmentally friendly detergents intended for use in pressurewashers.
Ask at your specialist dealer about these special products. Never use aggressive
chemicals (e.g. bleach), abrasive detergents or similar to avoid damage to your health,
the product and the environment.
WARNING
!
Avoid skin contact with detergents, in particular contact with eyes! If detergents gets
in
your eyes flush your eyes with clean water and seek immediate medicalattention!
Rinsing with the Pressure Washer
• Test a small area first to avoid surface damage.
• Rinse from top to bottom using long, overlapping strokes.
Moving the Pressure Washer
• Turn the pressure washer off.
• Tilt unit towards you until it is balanced on its wheels.
• Roll machine to desired location.
Summary of Contents for FNHPT240
Page 22: ...22 WIRING DIAGRAM...