ORIGINAL INSTRUCTIONS > EN
6. TECHNICAL DATA
Power supply
220-240V~; 50Hz
Power input
135W
No load speed
8000-33000/min
Collet capacity (max)
：
Ø3.2mm
Grinding disc (max):
Ø35mm
Mandrel length (max):
35mm
L
PA
(Sound pressure level): 68 dB(A)
K=3 dB
L
WA
(Sound power level):
79 dB(A)
K=3 dB
Vibration level a
h
:
1.42 m/s
2
K=1.5m/s
2
Weight:
0.6 kg
Information:
− That the declared vibration total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another;
− The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
− The vibration emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used; and
− Need to identify safety measures to protect the operator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the trigger time).
Suggestion: 1) Wear glove during operation
2) Limit operating time and shorten trigger time
7. ASSEMBLY
7.1 INSTALLING AND CHANGING A TOOL
NOTE: the tool must not be plugged to a power socket during this
operation.
Wear glove during this operation to avoid injury which is caused by
accessories.
Press and maintain the spindle lock button (B); rotate the collet nut
(D) slowly until it is loosen. You can use the wrench (E) to do this
operation.
Insert the shaft of the accessory into the collet (C). Always select
the appropriate sized collet for the bit being inserted. Ensure all
tools are fully inserted and the mandrels do not exceed the collet
more than 25mm, to reduce the risk of bending an accessory, or
excessive vibrations.
Press and maintain the locking button (B); turn it clockwise to
lightly tighten the collet nut (D).
11
