ORIGINAL INSTRUCTIONS > EN
h)
Use extra caution when making a “pocket cut” into existing walls or other blind areas.
The
protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.
1.5 ADDITIONAL SAFETY INSTRUCTIONS FOR WIRE BRUSHING
OPERATIONS
Safety warnings specific for wire brushing operations:
a)
Be aware that wire bristles are thrown by the brush even during ordinary operation.
Do not overstress the wires by applying excessive load to the brush.
The wire bristles can easily
penetrate light clothing and/or skin.
b)
Allow brushes to run at operating speed for at least one minute before using them. During this
time no one is to stand in front or in line with the brush.
Loose bristles or wires will be discharged during
the run-in time.
c)
Direct the discharge of the spinning wire brush away from you.
Small particles and tiny wire
fragments may be discharged at high velocity during the use of these brushes and may become imbedded in
your skin.
The maximum recommended diameter of mounted wheels, threaded cones and plugs shall not exceed 55
mm and the maximum recommended diameter of sanding accessories shall not exceed 80 mm.
2. SYMBOLS
WARNING-To reduce the risk of injury, user must read instruction manual.
Always wear goggles and ear protection
Class II product
In accordance with essential applicable safety standards of European directives
3. INTENDED USE
This machine is intended for grinding, sanding, polishing, wire brushing or cutting on metals, glass, wood
and ceramics with the appropriate attachments. Do not use machine attachments for works other than those
for which they are designed for! All other applications are expressly ruled out.
7
