ORIGINAL INSTRUCTIONS > EN
4
Clean the components of the air filter periodically, and replace the air filter when
necessary.
Remove any electrical equipment that is plugged in before starting or stopping the
generator.
Before transporting the generator, you must empty the fuel tank.
Maintenance and repair of the generator must be carried out by a qualified technician
from an authorized after-sales service center.
The adjustment points of the machine shall not be modified by the end-user. Any
modification shall be done by a qualified service.
Attention! Exhaust gases, oil and fuel are toxic. Do not operate the generator in a room
without ventilation system.
Refilling of the generating sets is not allowed during the operation.
If the generator will be mounted in a closed room, relevant safety regulations against fire
and explosion should be followed.
Do not connect to household circuit.
Do not use in wet condition.
Keep in flammable away.
Warning: when you start the generator with the cord, watch out for sudden changes in
the rotation of the motor!!! Risk of wounding!!!
Never cover the generator when it is running.
The cut-out mounted on the generator has the aim of reducing the risk of electric shock.
If it needs to be replaced with another cut-out, the latter must correspond to the
technical specifications of the generator. Due to important mechanical constraints, it is
necessary to use a flexible sheathed cable with a strong rubber protective layer
(conforming to IEC 245-4) or a similar cable.
When using extension lines or mobile distribution networks the resistance value shall
not exceed 1,5 Ω. For reference, the total length of lines for a cross section of 1,5 mm2
should not exceed 60 m; for a cross section of 2,5 mm2, this should not exceed 100 m
(except the case the generating set complies with the protection feature “protection by
electrical separation”.
Additional requirements for low-power generating sets for use by laymen
Protect children by keeping them at a safe distance from the generating set.
