ORIGINAL INSTRUCTIONS > EN
22
12.2A
(LPG)
Performance class
G1
Quality class
A
Max. temperature
40
o
C
Max. altitude
1000m
Protection class
IP23M
DC output
12V /8.3A
Size (LxWxH)
590x450x480
Net weight
38kg
Information
for regulator
& hose of LPG
Regulator
Inlet connection : G2 (W21.7x1.814-G2-
R5F )nut
Outlet: H1(M20x1.5)
Capacity: 1,5 kg/h
Outlet pressure: 37 Mbar
With French instruction NF approval
Hose
NF gas hose in rubber acc.to NF
XPD36-112 Length=0.75M With
REACH certificate phthalate
concen/-5%
Spark Plugs
OEM spark plug:
NHSP F6RTC
Replacement spark plug:
NGK BPR6ES or equivalent Make certain the spark plug gap is 0.7 - 0.8
mm or (0.028 - 0.031 in.).
Maintenance Valve Clearance
– Intake: 0.13 - 0.17 mm (0.005 - 0.007 in.)
– Exhaust: 0.18 - 0.22 mm (0.003 - 0.006 in.)
An Important Message about Temperature
Your HYUNDAI t product is designed and rated for continuous operation at ambient temperatures up to
40°C (104°F). When your product is needed your product may be operated at temperatures ranging
from -15°C (5°F) to 50°C (122°F) for short periods. If the product is exposed to temperatures outside
this range during storage, it should be brought back within this range before operation. In any event, the
product must always be operated outdoors, in a well-ventilated area and away from doors, windows
and other vents.
7.
TROUBLESHOOTING
Problem
Cause
Solution
Generator will not start
No fuel
Add fuel
Faulty spark plug
Replace spark plug
Unit loaded during start up
Remove load from unit
Generator starts but runs
roughly
Low oil level
Fill crankcase to the proper level
Place generator on a flat, level surface
Choke in the wrong position
Adjust choke
Spark plug wire loose
Attach wire to spark plug
Generator shuts down
during operation
Out of fuel
Fill fuel tank
Low oil level
Fill crankcase to the proper level.
Place generator on a flat, level surface
Generator cannot supply
enough power or
overheating
Generator is overloaded
Review load and adjust. See “Power
Management”
Insufficient ventilation
Check for air restriction. Move to a
well-ventilated area
