F E I B A O V E L O X
58
58
58
58
183. Run the fuel pump-wiring plug through the hole in the bulkhead and
plug it into the ECU.
184. Lower the landing gear for better access, then stand the plane on its
nose. Put a pad on the floor to keep from scratching the nose. Many of
the following steps are easier to perform with the plane standing on the
nose. Find the temperature sensor plug. Install an extension on it if
need be to make it long enough to reach the ECU. Do the same for the
RPM sensor for the turbine.
185. Drop these leads down through the hole shown in the bulkhead until
they emerge in the forward fuselage near the ECU. Use a wheel collar
on a string if needed.
Summary of Contents for Velox
Page 64: ...64 64 64 64...
