Fei Bao Velox, Assembly Manual, Page: 28 / 64

F E I B A O V E L O X
28 28 28 28
the ball links. Go very slowly on this, if the holes end up oversize, you
will need to replace them. Do all 7 control horns at once.
89. Bolt a horn into place, and adjust the linkage to the correct length.
90. Put a piece of masking tape on the surface of the rudder where the horn
will go. This tape will protect the surface while you work there, and keep
any markings you need to make from being on the surface itself.
91. Mark the location of the horn.
92. Cut the slot for the horn. Power tools are a little dangerous here, as if