F E I B A O V E L O X
36
36
36
36
116. Surround each control horn slot with masking tape, leaving a 1/8"
border all around. Do not tape the area in front of the horn, only the two
sides and the rear.
117. Fill the slot completely with Hysol. Inject the glue as far in as you can
go, it's much better to have excess glue here than too little. This
application is another great reason to use the Hysol glue gun and
nozzles, it is very difficult to get the glue down inside the slot without a
glue gun.
118. Add a bead of glue to each side of the control horn. Be sure to use
your nozzle to inject glue into the small holes in the horn, they need to be
filled with glue for proper strength of the joint.
Summary of Contents for Velox
Page 64: ...64 64 64 64...
