1-800-888-2418 | www.feeneyinc.com
8
Step 3B – A
ach LED Array
Feed LED array lead wire through array bracket and a ach to
spli er branch or . Push excess wiring and connectors back into
post through the power source lead wire hole. Insert LED array
into bracket and snap into place to secure
(See Figure 3.2).
Step 3C – Insert Lens
Slide the lens onto the moun ng plate, by inser ng back plate
into angled receiver
fl
anges on moun ng plate
(See Figure 3.4).
Step 3D – Secure Lens
Secure the lens and the moun ng plate to the post using two of
the provided #8 x 3/4” self-tapping screws
(See Figure 3.5).
Step 3E – A
ach Cover
A ach the cover onto the moun ng plate by aligning the tabs on
the cover with the slot on the sides of the moun ng plate and
sliding the cover down un l it comes into contact with the lens
(See Figure 3.6).
POWER
SOURCE
LEAD WIRE
LENS
COVER
Figure 3.2
Figure 3.4
Figure 3.5
Figure 3.6