11
COMMS ACTIVITY GAP...
The period of time that the terminal waits before going
into off
-
line mode can be changed in multiples of 1 second. To set this delay, select the
‘
COMMS ACTIVITY GAP
’ option from the main scrolling menu by pressing
SW1
when it
is displayed.
By pressing
SW1
when the up or down arrows are displayed, select the required delay.
When the required delay has been selected, press
SW1
when the tick is displayed to
confirm.
RESTART...
For any changes to take effect and to exit the setup mode, the terminal
must be restarted. To restart the terminal, select the ‘
RESTART
’ option from the main
scrolling menu by pressing
SW1
when it is displayed. The terminal will display ‘
Shutting
down...
’ and then beep once.
The terminal will then display ‘
Please wait?
’ and revert to it’s online mode.
The terminal is now ready to use.
COMMS ACTIVITY GAP
COMMS ACTIVITY GAP
1
RESTART
Shutting down...
Please wait...
COMMISSIONING THE TERMINAL
