10
COMMS RATE...
To set the communications rate, select the ‘
COMMS RATE
’ option
from the main scrolling menu by pressing
SW1
when it is displayed.
By pressing
SW1
when the up or down arrows are displayed, scroll to the communication
rate required. Communication rates from 600 to 38400 baud can be selected.
When the required type has been selected, press
SW1
when the tick is displayed to con-
firm.
TERMINATE TRANSMISSIONS...
To specify the terminate transmission option,
select the ‘
COMMS TERM TX
’ option from the main scrolling menu by pressing
SW1
when it is displayed.
By pressing
SW1
when the up arrow is displayed, select whether to ‘
ENABLE
’ or
‘
DISABLE
’ the termination character. Press
SW1
when the tick is displayed to confirm.
TRANSMIT DELAY...
The period of time that the terminal waits after receiving a
message before transmitting a response can be changed in multiples of 1mS. To set the
transmit delay, select the ‘
COMMS TX DELAY
’ option from the main scrolling menu by
pressing
SW1
when it is displayed.
By pressing
SW1
when the up or down arrows are displayed, select the required transmit
delay. When the required delay has been selected, press
SW1
when the tick is displayed
to confirm.
COMMS RATE
COMMS RATE
38400
COMMS TERM TX
COMMS TERM TX
ENABLE
COMMS TX DELAY
COMMS TX DELAY
1
COMMISSIONING THE TERMINAL
