7
Wiring and Programming the Light
Installation and Service Instructions
Federal Signal
www.fedsig.com
Mounting the Light with the Bracket
To mount the light with a bracket:
1.
Select a mounting location for the light and best orientation of the brackets.
2.
Attach the appropriate visor to the light head. Press the visor firmly to snap it
into place. See Figures 1 and 2 starting on page 4.
3.
Attach the pivot bracket to the light head using the supplied #8 pan head
screws. Do not overtighten.
4.
Attach the bail bracket to the pivot bracket with the supplied #10 pan head
screws and lockwashers. The lockwashers go between the bail and the pivot
bracket.
5.
Attach the bail bracket to the vehicle using the appropriate user-supplied
hardware.
Wiring and Programming the Light
XStream
®
lights are available as accessory plug or synchronizable models.
Wire Functions of Cigarette Plug Models
RED WIRE: Memory 1 (to + Vdc) (red switch on cigarette plug)
WHITE WIRE: Steady Flood (to +Vdc) (green switch on cigarette plug)
Dual head only: Press
S1
to change which heads are steady flood.
Accessory plug models are distinguished by the letter C in the part number.
Wire Functions of Synchronizable Models
Sync models have three additional wires:
BROWN WIRE: Memory 2 (to +Vdc)
GREEN WIRE: Sync/Program
To synchronize the lights, set them to the same color mode and flash pattern and
connect the green wires. Do not sync patterns 8, 9, or 10.
BLACK WIRE:
GND (to – chassis ground)
