Federal Signal Corporation XStream XSM Series, Installation And Service Instructions Manual

Page: 10 / 12

10
Instructions to Use with Flash Pattern Helper
XStream
®
Model XSMxx-xxx
Federal Signal www.fedsig.com
Table 6 S2 Color Modes
Color
Mode
Single Head Dual Head 1 Dual Head 2 Description
1
Color 1, 2, 3 Color 1, 2, 3 Color 1, 2, 3 Heads flash COLOR1, COLOR2,
and COLOR3
2
Color 1 Color 1 Color 1 Heads flash COLOR1
3
Color 2 Color 2 Color 2 Heads flash COLOR2
4
Color 3 Color 3 Color 3 Heads flash COLOR3
5
Color 1, 2 Color 1, 2 Color 1, 2 Heads flash COLOR1 and
COLOR2***
6
Color 1, 3 Color 1, 3 Color 1, 3 Heads flash COLOR1 and
COLOR3***
7
Color 2, 3 Color 2, 3 Color 2, 3 Heads flash COLOR2 and
COLOR3***
8
Color 1
(duplicates 2)
Color 1 Color 2 Head 1 flashes COLOR1, Head 2
flashes COLOR2***
9
Color 1
(duplicates 2)
Color 1 Color 3 Head 1 flashes COLOR1, Head 2
flashes COLOR3***
10 Color 2
(duplicates 3)
Color 2 Color 3 Head 1 flashes COLOR2, Head 2
flashes COLOR3***
***Use Swap Colors function to reverse. (Table 5).
Instructions to Use with Flash Pattern Helper
For the flash pattern, connect the
SYNC
/green wire to the
FP
port:
1. Set the
MODE
to
AUTO
.
2. Set the flash pattern number to the desired setting. See Table 4 on
page 9.
3. Press
START
.
For other settings:
1. Set the Mode to
AUTO
.
2. Set the flash pattern number to the desired setting. see Table 7 on
page 11.
3. Press START .