26
Installation
UltraVoice Indoor Controller (UVIC)
Material Description
Purpose
Qty
1/2 inch Seal Tight Conduit and
Fittings
Electrical conduit from disconnect
5 in
Metal Ground Bushings
Equipment ground connections
2
Screws, appropriate to mounting
surface
Disconnect mounting
4
15 A Breaker
Service panel breaker serving unit
1
White Wire appropriately sized
AC neutral from breaker panel to disconnect Varies
Black Wire appropriately sized
AC load from breaker panel to disconnect
Varies
Green Wire appropriately sized
Equipment ground from breaker panel to
disconnect
Varies
Conduit and fittings, appropriately
type and size for particular
installation requirements
Electrical conduit from breaker panel to
disconnect
Varies
#6 Stranded
Cabinet ground to earth ground for external
antenna applications
Varies
Concrete or Filled Cement Block Wall Mounting Guidelines
Table 22 Concrete or Filled Cement Block Wall Mounting Materials
Material Description
Purpose
Qty
3/8 x 3 in
Pin/Sleeve/Lock Washer/Nut
Style Anchors
Anchor Bolts
4
1. Mark the mounting hole locations on the wall for the cabinet.
2. Install the anchor bolts for the four cabinet corners according to the manufacturer’s
instructions.
3. Mount the cabinet to the wall.
4. Proceed to following section.
NOTE
: If wall is not straight, use shims to insure enclosure maintains square and
structural integrity.
Hollow Block Wall Mounting Guidelines
Table 23 Hollow Block Wall Mounting Materials
Material Description
Purpose
Qty
3/8 x 4 in Heavy Duty Toggle Bolts
Anchor Bolts
4
1. Mark the mounting hole locations on the wall for the cabinet.
2. Install the anchor bolts for the four cabinet corners according to the manufacturer’s
instructions.
3. Mount the cabinet to the wall.
4. Proceed to following section.
