2-4
LEVEL 2
Always leave the Slide Switch OFF
while programming!
GENERAL
LEVEL 2 is used to reconfigure indi-
vidual keys. Only certain keys are
reconfigurable. They are displayed in
the above graphic.
To reconfigure a key, simply press the
key you wish to reconfigure. Once the
key is pressed, go to LEVEL 2 - KEYS
(next page) to see how that key is
configured and how to reconfigure it.
When all the keys are configured the
way you wish, press the SAVE key to
save changes and return to the MAIN
MENU.
HORN RING KEY
On typical Siren systems that are
equipped with the TAPII function, when
the Horn is pressed, the Siren changes.
With Vision Premium, the
siren and the
lights have the capability of changing
with the Horn press.
Therefore, the system needs to know
what to do when the Horn is pressed.
The HORN RING KEY is where this
information is configured.
Simply enter the HORN RING KEY like
any other key and configure it with
LEVEL 2 - KEYS instructions just like
any other key.
The Horn Ring Key MUST have a
pattern configured into it.
The Horn Ring Key can be configured
as an 8-second timeout key. (Use key
20 on the next page to select the 8-
second timeout function.)
PROGRAMMING SLIDE
SWITCHES
To program the slide switches, simply
press the appropriate key above the
slide switch to enter LEVEL 2 - KEYS
(next page).
IMPORTANT NOTES:
Slide switch positions must be pro-
grammed with a Pattern to assure proper
operation.
Slide Switches must be programmed
as Push-On/Push-Off.
