13
1. Configuring the Network Interface
Setup, Configuration, and Operation Manual
Federal Signal
www.fedsig.com
Fields
Description
Enable
Factory
Support User
Check the box to enable the factory support user. When enabled,
a hidden static user and password is enabled for Federal Signal
technical support. You can disable this user.
Apply
Saves your settings. You must reboot for changes to take effect.
2.
For the Admin fields, enter the default Username:
admin (This is the default username.)
3.
For the Admin fields, enter the Password:
fedsig (This is the default password.)
NOTE
: The password is case sensitive.
4.
Enter the fields for Users 1 through Users 4 to create optional users. Each username
requires a password and a security privilege.
5.
Click Enable Factory Support User to enable a hidden static user and password for
Federal Signal Technical Support.
6.
Click Apply to save changes.
7.
Reboot the device to load the changes into the RTU.
Uploading Firmware
Use the Upload Firmware page to load a new operating system into the Digi Ethernet
module. The Home page displays the current version of the firmware.
To upload new firmware:
1.
Select Upload Firmware.
The Upload Firmware page appears.
Fields
Description
Select Image
Click Choose File to open a dialog box. Select the new image.bin file
to upload.
Upload
Click the Upload button to upload the new image.bin file.