5
Federal Signal
signaling.fedsig.com
ELECTROSTATIC HAZARD: The VoIP PCBA is susceptible to damage from electrostatic discharge (ESD) and is
protected by a metal shield. If it is necessary to remove the shield, take suitable precautions.
SHOCK HAZARD: If using an auxiliary power supply, ensure that it is unplugged during installation to avoid an
accidental shock or circuit damage.
NOTES:
•
Determine if power to operate the telephone will be provided via the Ethernet or if external power will be required. If
external power is required, install an auxiliary power supply
•
To maintain Ingress Protection / NEMA ratings, use appropriately rated hardware and waterproofing techniques.
•
Choose a wall location that is free of obstructions and permits space for conduit runs.
•
Ensure that mounting can support 7 lb (3.2 kg) and any additional foreseeable load.
To install the telephone:
1.
Separate the faceplate from the housing.
2.
Use the template provided or the enclosure itself to locate and drill holes for the mounting screws.
3.
Secure the unit to the wall with user-supplied 1/4
"
or M8 screws.
4.
Bring the network cable into the enclosure through the conduit entrance and plug into the RJ-45 connector on the
PCBA. See Figure 4.
