3
Federal Signal
signaling.fedsig.com
•
Product self-diagnostic testing available through web interface
•
Network-adjustable speaker volume and microphone sensitivity sets the default levels. User-adjustable volume
control on Handset
•
PoE 802.3af enabled (Power-over-Ethernet) or alternate power source
•
Web-based user interface allows remote setup of network, product operations, updates, self-diagnostics, and other
functional access
•
Auxiliary relay – multiple activation selectable through web interface.
•
Dual speeds of 10 Mbps and 100 Mbps
•
Network/Web management
•
Dial Out Extension supports the addition of comma delimited pauses before sending additional DTMF tones
•
Network downloadable product firmware
•
Tamper proof design
•
Autoprovisioning and Device Configuration Export/Import saves setup time on multiple deployments
•
Configurable audio files
•
Event Monitoring / Triggers (Refer to VoIP Configuration Guide – Part Number 25500857)
•
Peer-to-peer capable
Supported Protocols
The WRT-VoIP Telephone with Keypad supports:
•
SIP (Session Initiation Protocol)
•
HTTP Web-based configuration
•
Provides an intuitive user interface for easy system configuration and verification of WRT-VoIP Telephone with
Keypad operations.
•
DHCP Client
• Dynamically assigns IP addresses in addition to the option to use static addressing.
•
TFTP Client
•
Facilitates hosting for the autoprovisioning configuration file.
•
RTP
•
Facilitates autoprovisioning configuration values on boot.
•
Audio Encodings
•
PCMU (G.711 mu-law)
•
PCMA (G.711 A-law)
•
G722.1 (Siren7)
•
G722.2 (AMR-WB)
•
G729.1 (G729J & G729EV)
Supported SIP Servers
As a SIP device, this product will operate with most IP PBX servers.
Installation
The Voice-over-IP (VoIP) FT100C-V Telephone is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) two-way
communications devices that easily connect into existing local area networks (LANs) with a single cable connection.
