background image

Warranty 

– Seller warrants all goods for five years on parts and 2-1/2 years on labor, 

under the following conditions and exceptions: Seller warrants that all goods of 

Seller's manufacture will conform to any descriptions thereof for specifications which 

are expressly made a part of this sales contract and at the time of sale by Seller such 

goods shall be commercially free from defects in material or workmanship. Seller 

reserves the right at the Seller’s discretion to “Repair and Return” or “Replace” any 

item deemed defective during the warranty period. This warranty does not cover 

travel expenses, the cost of specialized equipment for gaining access to the product, 

or labor charges for removal and reinstallation of the product. This warranty shall be 

ineffective and shall not apply to goods that have been subjected to misuse, neglect, 

accident, damage, improper maintenance, or to goods altered or repaired by anyone 

other than Seller or its authorized representative, or if five years have elapsed from 

the date of shipment of the goods by Seller with the following exceptions: lamps 

and strobe tubes are not covered under this warranty. Outdoor warning sirens and 

controllers manufactured by Federal Warning Systems are warranteed for two years 

on parts and one year on labor. No agent, employee, representative or distributor 

of Seller has any authority to bind the Seller to any representation, affirmation, or 

warranty concerning the goods and any such representation, affirmation or warranty 

shall not be deemed to have become a part of the basics of the sales contract and shall 

be unenforceable. THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN 

LIEU OF ALL OTHER WARRANTIES OR MERCHANTABILITY, FITNESS FOR 

PURPOSE AND OF ANY OTHER TYPE, WHETHER EXPRESS OR IMPLIED. 

These warranties shall not apply unless Seller shall be given reasonable opportunity 

to investigate all claims for allegedly defective goods. Upon Seller's instruction a 

sample only of allegedly defective goods shall be returned to Seller for its inspection 

and approval. The basis of all claims for alleged defects in the goods not discoverable 

upon reasonable inspection thereof pursuant to paragraph 8 hereof must be fully 

explained in writing and received by Seller within thirty days after Buyer learns of 

the defect or such claim shall be deemed waived.

Industrial Systems

2645 Federal Signal Drive • University Park, IL 60484-3167

Tel: 708-534-4756 • Fax: 708-534-4852

Email: [email protected] • www.federalsignal-indust.com

© 2013 Federal Signal Corporation. All rights reserved.

Summary of Contents for 151XST Series





















Reviews: