3.1 Installing the UPS
- 11 -
2. To
match the position of each rail, set the washers for positioning
④
in the
corner hole of the rack respectively (four places of each rail). Then, fix the rail
with the screws for rack mounting
③
in the place of the corner hole with the
washers. Set up the bending part in the rail to the lower side and inside. (The
washers might become unnecessary by the kind of the rack.)
3. P
ut the system on the rail, and fix the right and left in the front side part with
screws for rack mounting
③
.
③
④
②
③
③
①
ラ
①
③
③
②
Enlargement
The figure which looked
at the rack from the front
①
③
The figure which looked
at the rack from the back
