U E Z G U I - 1 7 8 8 - 7 0 W V M
U s e r ’ s M a n u a l
P a g e
|
7
3/20/2024
Copyright ©2024, Future Designs, Inc
Revision 5
6.
Startup procedure
The µEZ GUI kit comes with a pre-installed Micro SD card that contains files required for the slide show and
videos
to run. It also contains users’ manuals, schematics, and documentation for the product.
Power is supplied via a USB cable and power supply provided in the kit. Connect the USB cable from the power
supply to (P2) the mini B USB connector labeled 5V 1A min input only. Note that the other USB connector (P1) is
for communications only and will not supply power to the unit. Also note that the minimum power requirement
is 1.0A so most USB power sources, which are limited to 500mA max, will not adequately power this unit.
The following screen should appear once power has been applied to the kit:
At this point the unit is ready for software demonstrations and user operation.
By connecting the USB A to mini B cable to P1, the µEZ GUI will also appear as a USB
Flash Drive to the PC, allowing the user to read/write files directly to the Micro SD card.
Example Display Images
shown for Reference Only
