U E Z G U I - 1 7 8 8 - 7 0 W V M
U s e r ’ s M a n u a l
P a g e
|
12
3/20/2024
Copyright ©2024, Future Designs, Inc
Revision 5
13.
Configuring Rowley CrossWorks CrossStudio for ARM® for J-Link
Flashing
1)
See the document “uEZ
®
Software Quickstart Guide” for
details on how to download the µEZ
®
source code
and setup the Rowley CrossWorks compiler.
https://www.teamfdi.com/uez/files/MA00015%20uEZ%20Software%20Quickstart%20Guide.pdf
2)
Plug in the J-Link device into the PC and install any drivers as directed. The Segger J-Link drivers can be found
at
https://www.segger.com/cms/jlink-software.html
with additional information at
https://www.segger.com/cms/development-tools.html
3)
Plug in the J-
Link’s JTAG connector to the
µEZ GUI board at J3 with the JTAG adapter.
4)
Select
Target
menu and choose
Targets
. The following list will appear to the right.
5)
Right click on “Segger J
-
Link”
and select Properties
6)
If programming a blank LPC1788 part, select a Speed of 100. If the part has already been programmed, select
a Speed of 1000.
