Product Manual
19
Bluetooth devices nearby.
4)
Select target Bluetooth to match;
5)
When matching is completed, state of VCI icon in the upper right corner of the
screen changes from "
" to "
", indicating that the Bluetooth pairing is
successful and the vehicle diagnosis can be started.
Note
: If the signal strength of the transmitter is too weak, Bluetooth device can't be
searched. In this case, please move it as close as possible to the VCI Bluetooth
device.
⚫
Paired through USB cable connection
USB connection is the fastest communication method between the host and the
VCI device. Please use dedicated USB cable configured by our factory to connect.
After the connection is completed, state of VCI icon in the upper right corner of the
screen changes from
“
” to “
” , indicating that the USB connection is
successful, and then the vehicle diagnosis can be started.
Note
: These two connection methods can't be used at the same time!
4
CLOUD DIAGNOSIS
The function is used to bind vehicles to perform vehicles diagnosis. The vehicle
diagnostic data can be saved locally and also uploaded to the cloud sever.
Note
:
1)
The diagnostic data can be uploaded to the cloud server only when [
Data
backup
] in the Setting page is set to On.