Product Manual
18
Instructions:
1)
Determine the diagnostic socket location and port, and whether need the
external power source;
2)
Connect the main test cable of the VCI to a dedicated adaptor corresponding
to the vehicle;
3)
Connect the dedicated connector that is connected to the main test cable to
the vehicle diagnostic socket;
4)
At this time, VCI box is powered by the vehicle diagnostic socket, and then
power indicator light is on (if it is not lit, it may be because the vehicle
diagnostic socket is not energized, you can energize the VCI box by the
cigarette lighter or the battery clip).
HOST AND VCI BOX CONNECTION
After VCI box is connected to the vehicle, the connection between the host and the
VCI box needs to be matched, and then vehicle diagnosis can be started after
matching is completed; the VCI box supports two ways of communicating with the
host: Bluetooth pairing and USB cable.
⚫
Paired through Bluetooth
1)
Turn on the host power supply and enter the Fcar auto diagnostic system;
2)
Click the VCI icon
“
” in the upper right corner of the screen and then
select [Bluetooth] in the connection mode;
3)
Click the Scan icon
“
” on the right side of the device to automatically scan
