Product Manual
33
The following are the general steps of the adaptive operation:
1)
Select the model and related configuration;
2)
Wait for the program to establish normal communication with the vehicle
ECU, select the functional operations that need to be performed, and some
functional operations need to meet specific conditions before they can be
performed;
3)
Carefully read the information on the screen and check the corresponding
vehicle status, strictly follow the menu prompts;
4)
After the adaptive operation is completed, the screen will display prompt
messages such as "Operation success" and "Matching completed".
CALIBRATION
The diagnosis system supports the calibration function for some model vehicles.
The operation method is similar to that of the Special Function.
6
DETECT TOOLBOX
“
Detect Toolbox
” function provides four detecting tools: Node Screening and Pin
Detecting.
CAN NODE SCREENING
This function is used to screen all nodes which can normally communicate with
ECU through CAN.
Note
: This function is only provided to part of models of vehicles, you can contact
FCAR for details.
“
Node Screening
” provides two searching ways
: