FCAR Product Manual
V1.1
22
strength of the transmitter is too weak. In this case, please move as close as
possible to the VCI Bluetooth device.
Through USB connection cable
USB connection is the fastest communication method between the F7S host
and the VCI device. Please use dedicated USB cable configured by our factory to
connect. After the connection is completed, state of VCI icon in the upper right
corner of the screen changes from “
” to “
”. , indicating that the USB
connection is successful, and then the vehicle diagnosis can be started.
Note: These two connection methods can't be used at the same time!
3.3.3 Vehicle type selection
When all the above connections are completed, click [Diagnosis] on Main
Menu to start the vehicle diagnosis. The following figure shows the gasoline
version of the vehicle selection interface. The other versions of the model
interface are similar.
1)
Toolbar (see Table 1 for details)
2)
Regards to model manufacturer and related detection functions, click on
“
” in upper right corner of the model to view function list and other
related information of the vehicle type.
3)
Asian, European, American major brand vehicle series selection menu
