FCAR Product Manual
35
V1.1
select Auto Vehicle Selection or Manual Vehicle Selection;
2)
Select [Actuation Test] on Diagnosis interface;
3)
Test item selection [ACC_CMD (air conditioner compressor command
status)];
4)
Drive the air conditioner compressor operation through [Off] and [On]
buttons. When an operation is successfully completed, the screen will
display “Operation Successfully” or other similar prompt information,
as shown in Figure 3.5.4-1.
5)
According to the implementation, test whether the working state of the
air conditioner compressor is normal. Click [Back] to exit the test.
Figure 3.5.4-1 Actuation Test
Note: The control buttons will be different according to the selected test item,
such as "On", "Off" or "+" "-".
With the “data customization” of some models of FCAR, you can also check
the working status or values
of other actuators and sensors associated with
the component based on actuation test, helping the service technician to find the
vehicle fault more accurately and quickly.
How to use data customization to do actuation test
1)
Enter Ford PCM (Powertrain Control Module) diagnostic interface by clicking
