FCAR Product Manual
V1.1
24
3.3. 2 Auto Vehicle Selection (for gasoline models)
The latest "Auto Vehicle Selection" function of FCAR smart diagnostic system
can skip Manual Vehicle Selection, to obtain specific vehicle information directly
from the vehicle ECU, and quickly enter the diagnostic interface after
confirmation. At present, this function supports a few models, subject to the
menu displayed. The following is an example of Lincoln:
1.
Select [LINCOLN] of AMERICA from the vehicle selection interface;
2.
Click [Auto Vehicle Selection] from the vehicle selection, then the diagnostic
program will automatically recognizes vehicle information;
3.
Check the vehicle information carefully and click [OK] to enter the vehicle
diagnosis interface directly.
3.3.3 Direct access to the vehicle system (for gasoline models)
If clearly know the cause of the vehicle failure, you only need to enter
specific system module. Currently the supported vehicle electronic control system
includes engine system, anti-lock brake system, and airbag. Here we take Bosch
M797 engine system as an example:
1)
Select [ENGINE SYSTEM] under CHINA menu in the vehicle selection
interface;
2)
Select [Bosch] in the engine electronic control system interface;
3)
In the Bosch engine interface [Bosch M797 engine system], the system will
automatically enter the function diagnosis interface.
3.3.4 Automatically scan VIN code (for gasoline models)
Automatic-scanning VIN code of FCAR smart diagnostic system can identify
all CAN-compatible vehicles. With function of automatic VIN code scanning,
service technicians can quickly find the target vehicle type. The operation steps
are as follows:
1)
Click [VIN] function icon on [Car Selection] and select [AUTO];
2)
Click [Start Scan], then the diagnostic instrument starts to scan the VIN code
on the ECU;
3)
Once the vehicle is successfully identified, the system will guide you to enter
