Fcar F4SN HD Pad Pro, Manual

Page: 4 / 50

FCAR F4SN Manual
4
vehicle in a well-ventilated place during operation;
⚫ When the engine is running at a high temperature, avoid contact with high temperature parts such
as water tanks and exhaust pipes;
⚫ Before starting the engine, the brake hand brake should be pulled, and the shift lever should be
placed in neutral (manual transmission) or P-range (automatic transmission) to avoid accidents
when the vehicle is started;
⚫ Before the vehicle is repaired, pull the parking brake, the transmission gear is hung in the neutral
or P gear, and lower the driver's seat side glass door and window;
⚫ If the engine can start, warm the car to normal temperature (water temperature is about 80 °C),
and turn off the auxiliary appliances (such as air conditioning, lighting, sound, etc.);
⚫ Locate the car diagnostics and check that the diagnostics line is intact and connect to the Tablet
for diagnosis. Otherwise, it is not necessary to test to avoid damage to the Tablet. If necessary,
measure the voltage of the diagnostic socket with a multimeter;
⚫
Instrument use precautions;
⚫ When testing with FCAR series products, it is necessary to handle them lightly, keep away from
heat source and electromagnetic field, avoid interference to the main machine;
⚫ You can't click on touch screen with sharp tools. It is recommended to use matching touch pen
operation;
⚫ When the electrical components are energized, the circuit cannot be disconnected to prevent
self-inductance and mutual inductance current from damaging the sensor and the vehicle ECU;
⚫ When the appliance is working normally, it is strictly forbidden to bring the magnetic object
close to the vehicle control unit, otherwise the vehicle control unit may be damaged;
⚫ When disassembling the car control unit or electrical components, the ignition switch must be
turned off for 1 minute;
⚫ Never operate the diagnostic equipment while driving the vehicle to avoid accidents.