FCAR F4SN Manual
17
Figure 3.2-1 Connection of the standard OBD-II interface
Instructions:
1)
Determine the location and interface of the diagnostic seat;
2)
Connect one end of the main test lead to the DB15 connector of the FV100 and
tighten the fixing bolts;
3)
Connect the other end of the main test lead to the OBDII-16 connector
；
4)
Connect the OBDII-16 connector to the main test lead to the vehicle diagnostics;
5)
At this time, the VCI box (FV100) is powered by the vehicle diagnostic seat, and the
power indicator light is on.
Note: After the test is completed, please rotate the fixing bolts and then gently pull off
the main test line to avoid damage to the diagnostic interface.
②
Non-OBD-II interface connection
For vehicles connected to non-OBD-II interfaces, need to connect the main test cable
to their corresponding dedicated connectors, as shown in Figure 3.2-2:
Summary of Contents for F4SN HD Pad Pro
Page 49: ...FCAR F4SN Manual 49 ...
Page 50: ...FCAR F4SN Manual 50 ...
