Fcar F4SN HD Pad Pro, Manual

Page: 19 / 50

FCAR F4SN Manual
19
2) Select [VCI Connection] in the function main menu; select [Bluetooth] in the
connection mode;
3) Click the Scan “ ”icon on the right side of the device list to automatically scan
nearby Bluetooth devices.
4) Select target Bluetooth to match;
5) When the matching is completed, the VCI icon in the upper right corner of the screen
changes from “ ”to“ ”to indicate that the Bluetooth pairing is successful
and the vehicle diagnosis can be performed.
Note: If the Bluetooth device is not searched, the signal strength of the transmitter
may be too weak. In this case, please be as close as possible to the VCI Bluetooth
device.
Via USB cable
The USB connection is the fastest communication method between the tablet Tablet
and the VCI device. Please use the dedicated USB cable configured by our factory to
connect. After the connection is completed, the VCI icon in the upper right corner of the
screen changes from“ ”to“ ” , indicating that the USB connection is successful.