Fbt Myra 214L, Manual

Page: 81 / 92

A ach the flybar to the first module using all four lateral fixing
points and the 4 ° angle.
Fig. 10
Make sure that all the locking pins have been inserted, that the
module angles have been set-up correctly and that the safety
locking mechanisms are in the correct posi on.
When the system is raised, each module will automa cally
assume the correct angle, at which point the safety lock is
ac vated, locking the modules together at the preselected
angle (Fig. 10).
Once the system has been raised slightly above ground level it is
possible to detach the trolley.
4°
VERTICAL ARRAY
When the array is raised, the safety mechanism is ac vated
automa cally, maintaining the preselected angle; at this point,
the mechanism is fully inserted so that the red marking is no
longer visible.
76
MYRA 214L INSTALLATION / SUSPENDED INSTALLATION