Fbt Myra 214L, Manual

Page: 85 / 92

- GROUND STACK
ANGLE SELECTION ( USE )
• Extract the locking mechanism and deac vate it
• Raise the modules manually one at a me (star ng from the
top) so as to unload the weight on the locking mechanism.
STORAGE & TRANSPORT
• Lower the module un l it is compacted with the one beneath it
• Select the desired angle by inser ng the safety pin in the
corresponding hole and ac vate the safety mechanism.
MYRA 214L modules are fi ed with a lateral flange used to
select the angle of aperture between the speakers; the colour
scheme is designed to make it easier to select the various steps,
which vary from 0.25° to 8°. The angles should always be
selected when the modules are posi oned on the transport
trolley, so that the locking pins are not subjected to loading.
ANGLE SELECTION:
• Extract the safety pins from their ini al posi on (8°)
Lowering the safety mechanism par ally enables it; the red
marking remains visible.
• Extrac ng the locking mechanism without suppor ng the
weight of the module causes the immediate closure of the
two modules: TAKE PARTICULAR CARE TO AVOID
INSERTING HANDS BETWEEN ONE MODULE AND
ANOTHER DURING THIS PHASE
80
WARNING
CRUSH AZARD.
MIND YOUR
HANDS
Manually li one module at a me un l the safety mechanism
locks automa cally (the red marking is no longer visible)