Fbt Myra 214L, Manual

Page: 78 / 92

MYRA 214L INSTALLATION
Place up to a maximum of 4 modules.
FRONT FIXING: Block the modules together using the safety
pin (fig. 4.1).
REAR FIXING:
Li the pin of the graduated flange and fix the safety pin on 8 °
(fig. 4.2).
In this assembly phase make sure that the safety mechanisms of
each added module have the red label clearly visible. (fig. 4.3).
Safety pin
TRANSPORT AND ASSEMBLY
During assembly the modules must always be set to 8 °.
ATTENTION: Make sure that all the fixing pins are correctly
inserted.
Linchpin
73