The noise gate can appropriately suppress the obvious background noise
caused by the accumula on of front-end equipment or improper system
se ngs. On the current page click PARAM1 to edit the overall state of the
noise gate and rotate PARAM2 / PARAM3 to open or close the noise gate.
NOISE GATE
The threshold can be adjusted from -80 dBu to -45 dBu through PARAM2.
The startup me can be adjusted from 1 ms to 1000 ms rota ng PARAM2.
The release me can be adjusted from 1 ms to 1000 ms by rota ng
PARAM2.
SETTINGS
PARAM. 2
PARAM. 2
Turning
Turning
CH - A N. Gate
Enable = OFF
CH - A N. Gate
Threshold = -80
CH - A N. Gate
Enable = ON
CH - A N. Gate
Threshold = -45
PARAM. 2
Turning
CH - A N. Gate
Rel Time = 1ms
CH - A N. Gate
Rel Time = 1.0 sec
PARAM. 2
Turning
CH - A N. Gate
Atk Time = 1ms
CH - A N. Gate
Atk Time = 1.0 sec
The maximum allowable boost gain value can be set separately for UHF and
UHF and the se ng of star ng speed is also provided.
When the signal strength is low, the boost ra o is rela vely large; when the
signal strength is high, the boost ra o is rela vely small or even zero.
In the input channel the working principle is based on the equal loudness
curve of the human ear to compensate and enhance the ultra-low
frequency and ultra-high frequency.
DYNAMIC LOUDNESS BOOSTER
PARAM. 2
Turning
CH - A Loudness
Enable = OFF
CH - A Loudness
Enable = ON
When adjus ng the maximum allowable gain the adjustment step of the
knob PARAM2 is 1 dB and the adjustment step of PARAM3 is 0.1 dB.
PARAM. 2
PARAM. 2
Turning
Turning
CH - A Loudness
Lo - MaxBoost = 0.0 dB
CH - A Loudness
Hi - MaxBoost = 0.0 dB
CH - A Loudness
Lo - MaxBoost = +10.0 dB
CH - A Loudness
Hi - MaxBoost = +10.0 dB
There are three levels of start-up me adjustable, namely fast, medium and
slow.
CH - A Loudness
Atk Speed = SLOW
CH - A Loudness
Atk Speed = MID
CH - A Gain
Gain = -18.0 dB
PARAM. 2
Turning
PARAM. 2
Turning
Controllable gain range from -18 to +12 dB, 0.1 d B step
GAIN
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 2
Turning
PARAM. 2
Turning
CH - A Gain
Gain = +12.0 dB
POLARITY
The overall polarity can be selected as posi ve polarity or -180° reverse
polarity, which can be used to match the phase of the loudspeaker or
correct the overall inversion caused by the wrong connec on of the signal
cable.
PARAM. 2
Turning
CH - A Polarity
Polarity = Normal
CH - A Polarity
Polarity = Inverted
12
