SETTINGS
Knob PARAM2 selects the 1234 channnel, turn PARAM3 to the right to
turn on and turn PARAM3 to the le to turn off the linkage.
• Click the PARAM3 bu on
For example, if you need to link output channels 3 and 4, the opera on
sequence is:
• Turn right PARAM3 to turn on
• Con nue to rotate PARAM2 to the right to select 4 channel
• Rotate the PARAM2 to the right to select 3 channels
• Use the PARAM1 knob to select system
• Click PARAM1 to enter the submenu
• Turn right PARAM3 to turn on
KEEP LINKED CHANNELS LEVEL OFFSET (LINKED BY DCA MODE)
Allows the fader to be link in equal propor ons in different posi ons. When
the propor on of the input or output channels needs to be adjusted as a
whole during use, the default linkage func on will make the gain of each
channel change along with the first changed channel. If you do not want to
use it if the gain ra o changes, you can use this func on, similar to the
DCA/VCA groups.
ENTER
PUSH
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 2
PARAM. 3
Select
output
channel
Enable
Disable
linkage
Linked Channel Mode
Offset INP=OFF OUT=OFF
Linked Channel Mode
Offset INP=ON OUT=OFF
Linked Channel Mode
Offset INP=ON OUT=OFF
Linked Channel Mode
Offset INP=ON OUT=ON
Linked Channel Mode
Offset INP=N/A OUT=N/A
Turning
Turning
PARAM. 2
PARAM. 3
When the channel linkage is not turned on, this func on is not available.
This func on can prevent the loud sound pressure from the loudspeaker
from frightening the staff when switching presets.
RECALL MODE (MUTE SAFETY)
When this mode is turned on, the current channel mute state will be
maintained regardless of reading any preset and only the muted state of the
preset will be read when this mode is turned off.
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 2
Recall Mode
Keep Actual Mutes = OFF
Recall Mode
Keep Actual Mutes = ON
Turning
ENTER
PUSH
ON/OFF
PARAM. 2
PARAM. 3
ON/OFF
Protect the output from distor on Keep the signal a er the processor A/D
will not be distorted and ensure that no distor on occurs in the processor
regardless of any improvement.
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 2
ON/OFF ON/OFF
Recall Mode
Keep Actual Mutes = ON
Prevent Output Clip
Prevent ENABLE = ON
Turning
PARAM. 2
PARAM. 3
ENTER
PUSH
8