SETTINGS
VIEW FIRMWARE VERSION
You can check the firmware version of the current processor, you can go to
the our website to download the latest version of the firmware to get
func on updates and bug fixes.
Among them FP is the front panel firmware and MB is the main board
firmware.
SYSTEM UTILITY
Firmware Version
Firmware Version
FP = 1.1.1 MB = 0.9
• During the upgrade keep the power supply intact. If the upgrade fails
midway, irreversible data loss may occur.
• The firmware version can be upgraded online
Note :
• Back up all presets before the firmware upgrade
PROGRAM (PRESET) SETTINGS
Under UTILITY MENU turn the PARAM1 knob to select program u li es.
UTILITY MENU:
Program Utilities
Can read previously saved presets from this unit (before pressing read,
please save the current preset, otherwise the current modifica on will be
lost) Add a box.
READ PRESET
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 1
Recall a Program
P01 : P15 + SUB218
Recall a Program
P01 : P12 + SUB18
Turning
ENTER
PUSH
• Press PARAM1 to wait for the machine to finish reading
• Choose P03
• Turn the PARAM1 knob to the right
• Press PARAM1 to recall a program
Press U lity
• Turn the PARAM1 knob to the right
For example read the preset 3 from the machine
• Go to Program U li es and press PARAM1
Save the current input/output /rou ng and the en re state of the filter to
the machine.
SAVE PRESET
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 1
PARAM. 3
Select the
next edit
loca on
Select
characters
Save a Program
P01 : FACTORY PRESET
Save a Program
P02 : FACTORY PRESET
Save a Program
P02 : FACTORY PRESET
Save a Program
P02 : PRESENT 1
Turning
Turning
PARAM. 2
PARAM. 3
ENTER
PUSH
• Click the PARAM3 bu on
• Use the PARAM1 knob to select program
• Press PARAM1 to enter the submenu
• Rotate PARAM1 to the right to select save a program
• Press PARAM1 to enter the next level
• Rotate PARAM1 to the right to select the preset posi on (such as P01)
For example, if some changes have been made to the channel and need to
be saved in the processor, follow the steps below to save:
• Press PARAM1 to confirm
9
