FAZUA Evation 1.0, Original Instructions Manual

Page: 15 / 157

Setting the Support Level
You can set on the Remote (1) to what extent should the eBike system support
you when pedaling. The support level can be set at any time, even while
riding. In order to switch the support level, you must press the up/down buttons
(2,4) on the Remote (1) .
The following support levels are available:
• No Support (white) : The motor support is switched off. The eBike can
be driven as a normal bicycle.
• Breeze (green) : Efficient support to maximize the eBike range.
• River (blue) : Solid support suitable for most of scenarios.
• Rocket (pink) : Maximum support for the most demanding tours.
Support Level Color Max. Support Factor Max. Power
No Support White 0% 0 W
Breeze Green 75% 125 W
River Blue 150% 250 W
Rocket Pink 240% 400 W
Switching the Walk-assistance mode on/off
The Walk-assistance function helps to push the eBike. The speed of the eBike
in Walk-assistance mode may vary depending on the set gear, with maximum
speed of 6 km/h. The user can reduce the speed of the eBike to his own by
holding it firmly while walking.
To activate the Walk-assistance mode, set your system to “No Support“ mode
on the Remote (See Remote Instructions ). Then, press and hold the “Down“
button on the Remote. After 2 s the Walk-assistance mode switches on.
Warning! The Walk-assistance mode is intended to be used only
while pushing the eBike. A misuse of the Walk-assistance mode
assumes risk of injury.
Warning! Make sure your hands are firmly holding the handlebar
of your eBike when using this function, otherwise you may
momentarily lose control over the eBike.
The Walk-assistance is switched off when:
• You release the “Down“ button (4) .
• The wheels of the eBike are blocked.
• The speed exceeds 6 km/h
Remote control quick guide
Action Button Duration
Switch On Any Any
Switch Off Middle 2 s
Increase support level Up Any
Decrease support level Down Any
Walk-assistance mode On
1. (In No Support
mode)
2. Down
> 2 s
26 27
EN EN