38
After linearization is completed, the
linearity of the touch screen will be
shown in the Linearity curve window.
The Draw Test function is used for
accuracy and performance checking.
Press this button and a new pop up
window will be popped up on the moni-
tor . Touch or drag your touch pen or
finger on this grid to gauge the effec-
tiveness of the settings and calibrations
that you have made. If you are using
your finger, you may have to press firmly
to draw continuous lines. Press the Clear
button to clear the window. Press the
Quit button to terminate this draw test.
Display-Multi-Monitor
Setting
tab:
If you selected “Support Multi-Monitor
System” when you installed the Touch
driver, you will see a Display tab when
you run the Touchkit Configure utility. If
you did not select this option, you will
not see a Display tab.
You can have up to four faytech
touch-screens connected simultaneously.
You can also use a (non-touch) display
and a touch screen. In the example
below, the touch-screen is display "1",
while the second display "2" is a normal
monitor. Both have the same resolution,
but the touch screen is the primary
monitor.
Enable multiple-monitors: When this
function is disabled, the touch screen
will be mapped to the primary monitor
automatically. When this function is
enabled, you can double click on the
monitor area in the monitor geometry
window to assign the monitor area
where the touch screen will be mapped.
Double-tap on the desired monitor and
answer the question in the pop-up
window with
Yes
.
After confirmation, your touches on the
selected touch monitor will be simulated
as mouse clicks.
