Fayat Dynapac DFP9, Operating Instruction, Maintenance Instruction

Page: 91 / 106

NOTICE!
Electric components can be damaged by water
entering into the system!
– Do not direct the water jet directly into the air
filter, carburettor, recoil starter, air intake or
engine stop switch.
1.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Spray the engine with a suitable, non-inflammable cleansing
agent, let is soak in for a while, clean it off with water and
blow out with compressed air.
2. Warm up the engine for a while to avoid corrosion.
3. Look for the cause of oily contamination and have any leaks
sealed by our customer service.
8.9.2 Cleaning the machine
NOTICE!
Danger of engine damage caused by reduced
cooling!
– Immediately remove any oil or fuel leaks near
fuel tank, cylinders or cooling air intake.
1. Park the machine safely Ä Chapter 6.5 ‘Parking the machine
in secured condition’ on page 61 .
2. Allow the engine to cool down for at least 30 minutes.
NOTICE!
Electric components can be damaged by water
entering into the system!
– Do not direct the water jet directly into the air
filter, carburettor, recoil starter, air intake or
engine stop switch.
3. Clean the machine with a water jet.
4. Warm up the engine for a while to avoid corrosion.
Maintenance – As required
DFP9 91