Fayat Dynapac DFP9, Operating Instruction, Maintenance Instruction

Page: 51 / 106

5.6 Checking the water level, topping up
NOTICE!
Dirty or contaminated water can block the bore-
holes!
– Fill only with clean water.
NOTICE!
Components may get damaged by frost!
– Drain all water off if there is a risk of frost.
Protective equipment:
n
Working clothes
n Safety shoes
n Protective gloves
1. Clean the area around the filling port.
2. Remove the cap (1) and check the water supply in the water
tank.
3. If necessary, fill in clean water.
4. Close the cap.
Alternatively, the water tank can also be removed and transported
for filling.
1. Close the shut-off valve (1).
2. Loosen the hose clamp and pull the hose (2) off the shut-off
valve.
3. Lift off the water tank upwards.
B-834-0224
Water
1
Fig. 34
B-834-0083
1
2
Fig. 35
Checks prior to start up – Checking the water level, topping up
DFP9 51