Fayat Bomag BPR 25/40 Operating Instructions Manual Download Page 82

Page: 82 / 110

NOTICE!
Danger of engine damage!

–

Insert the filter element correctly.

Install the rubber seal (4).

Insert the filter element (5) correctly and tighten it with the

wing nut (3).

10.

Tighten the cover (2) with the wing nut (1).

11.

Dispose of the old filter element in an environmentally

friendly way.

8.8.5 Replacing the V-belt

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Park the machine safely

Chapter 6.5 „Parking the machine

in secured condition“ on page 60

Allow the engine to cool down.

Unscrew the V-belt guard (1).

B-692-0148

Fig. 83

B-692-0151

Fig. 84

Maintenance – Annually

BPR 25/40

Discount-Equipment.com

order

your

parts

Summary of Contents for Bomag BPR 25/40















































































































Search results

Summary of Contents for Bomag BPR 25/40

Reviews:

Related manuals for Bomag BPR 25/40

Brands by name

Popular brands

Fayat Bomag BPR 25/40, Operating Instructions Manual

Search results

Summary of Contents for Bomag BPR 25/40

Reviews:

Related manuals for Bomag BPR 25/40

Brands by name

Popular brands