manualshive.com logo in svg

Fayat Bomag BPR 25/40, Operating Instructions Manual

Share
Download
Fayat Bomag BPR 25/40 Operating Instructions Manual Download Page 89

8.9  Every 2 years / every 500 operating hours

8.9.1  Changing the hydraulic oil

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Park the machine safely

 

Ä

 Chapter 6.5 „Parking the machine

in secured condition“ on page 60

.

2.

Adjust the steering rod with height adjustment so that the

area with the filler screw is horizontal.

3.

Unscrew the filler screw.

4.

Press the travel lever forward against the end stop and

secure it using suitable means.

5.

Unscrew the bleeding screw and collect any oil running out.

6.

Screw in the bleeding screw.

B-692-0045

Fig.  103

B-692-0048

Fig.  104

B-692-0072

Fig.  105

Maintenance – Every 2 years / every 500 operating hours

 

BPR 25/40

 

91

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for Bomag BPR 25/40















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands