Fayat Bomag BPR 25/40, Operating Instructions Manual

Page: 95 / 110

8.10.5 Checking the oil level in the exciter housing
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä
Chapter 8.3 „List of fuels and lubri-
cants“ on page 71 .
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine on level ground.
2. Park the machine safely Ä Chapter 6.5 „Parking the machine
in secured condition“ on page 60 .
3. Allow the machine to cool down.
4. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
5. Unscrew the bleeding screw.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
6. Unscrew the filling/drain plug and check the oil level; top up if
necessary.
ð
Nominal value: Bottom edge of filling/drain bore.
7. Clean the bleed screw and filling/drain plug and screw them
in with a low-strength sealing agent (e.g. spare parts number:
009 700 16).
8.10.6 Cleaning the machine
NOTICE!
Danger of engine damage caused by reduced
cooling!
– Immediately seal any oil or fuel leaks near fuel
tank, cylinder or cooling air intake.
1. Park the machine in secured condition
Ä
Chapter 6.5
„Parking the machine in secured condition“ on page 60 .
2. Allow the engine to cool down for at least 30 minutes.
1 2
B-692-0011
Fig. 118
Maintenance – As required
BPR 25/40 97
Go
to
Discount-Equipment.com
to
order
your
parts