Fayat Group SCARAB M25H, Operating And Basic Maintenance Instructions

Page: 30 / 74

Manual No. SCAZ043075 1.7.01
30
E&OE
M25H Road Sweeper Operating Instructions
Remote control switch box
The hopper raise/lower and rear door open/close switches are located on the remote control switch box.
This is stowed in the cab, between the drivers seat and the cab door, it is connected to a socket via a coiled
lead.
In the interests of health and safety and to avoid possible damage to the sweeper and/or adjacent
structures, it is essential that the remote controls are not activated within the cab. Always use
outside of the machine from a vantage point that affords a good view of the machine and its
immediate surroundings. Wear a high visibility jacket/waistcoat .
Hopper Raise - Press and hold to raise the hopper.
The hopper safety prop should always be in the deployed position when the hopper is in the raised
position. Failure to do so could result in serious injury. See page 36.
Hopper Lower - Press and hold to lower the hopper.
Ensure that the hopper safety prop is returned to its stowage position before attempting to lower
the hopper and no obstructions are present under the hopper. Failure to do so could result in
damage to the machine and/or serious injury. See page 36.
Rear Door Open - N/A - Future option.
Ensure that the suction fan has been switched off before attempting to open the rear door because
the fan creates a vacuum within the hopper space preventing the door from being opened.
The rear door safety prop must be in the deployed position whenever working under the rear door.
See page 34.
Rear Door Close - N/A - Future option.
The rear door safety prop must be removed and no obstructions are present before lowering the
rear door. See page 34.
Option.
SAFETY INTERLOCK
This switch must be
pressed in and held before
any of the control
switches are operated.