Open the rubber cover.
Take the safety crank handle (1) out of the bracket.
Insert the safety crank handle.
Stand in a correct position to the machine . Hold the crank
handle properly.
Turn the crank handle with both hands slowly in direction of
arrow until it engages.
Then turn the crank handle with increasing speed, until the
engine starts.
The positive engagement between engine
and crank handle must be ensured by pow-
erful turning and should by no means be
interrupted during the starting process.
When the decompression lever returns to ini-
tial position (after five revolutions) the highest
speed must be reached.
If the engine does not start repeat the
starting process.
In case of incorrect operation and repeated
starting the decompression lever must
always be returned to initial position.
Hook the safety crank handle (1) back into the bracket.
Close the plastic cover.
Fig. 22
Fig. 23
Fig. 24
Operation – Emergency starting with safety crank handle
BPR 70/70 D
37
Go to
Discount-Equipment.com
to
order your parts