manualshive.com logo in svg

Fayat Group BOMAG BP 20/50, Operating Instructions Manual

Share
Download
Fayat Group BOMAG BP 20/50 Operating Instructions Manual Download Page 50

 As required

BOMAG

55

BP 20/50, BP 25/50

l

Unscrew the fuel sludge filter (2), empty it and 
reassemble it leak tight with a new seal ring 
(3).

l

Unscrew the carburettor drain screw (4), let all 
fuel run out of the carburettor and turn the 
screw tightly back in again.

Fig. 70 

l

Pull off the spark plug socket (1) (Fig. 70) and 
unscrew the spark plug (2).

l

Fill in several drops of fresh engine oil through 
the ignition plug opening.

l

Crank the engine several times with the recoil 
starter to distribute the oil.

l

Screw the spark plug back in.

Fig. 71 

l

For this purpose align triangle mark (1) (Fig. 
71) on the starter disc to the top bore (2).

i

Note

Intake and exhaust valves closed. The combus-
tion chamber is protected against corrosion.

l

Cover the engine to protect it against dust and 
moisture.

i

Note

Depending on weather conditions these conserva-
tion measures will protect the machine for approx. 
6 to 12 months.

!

Caution

A machine with conserved engine must be 
clearly marked by attaching a clear warning 
tag. 

  

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Summary of Contents for BOMAG BP 20/50























































Reviews:

No comments

Brands by name

Popular brands

Load more brands